Assigning Mass Limits

Purpose

When utilising Load Sheets functionality in Gearbox and Prestart Mass Limits must be configured in order for Gearbox to accurately calculate your weight limts within different mass schemes.

Adding a Mass Limit

GML mass limit must be configured for all Mass Accredited vehicles.
  1. Under the Compliance tab within a vehicle click + Assign Mass Limit type

    Assign Mass Limit

    Assign Mass Limit

  2. The first Mass Limit must be GML, enter your Axle Group limits in kilograms and click Create mass limit to save.
    All weights must be entered in KGs NOT tonnes, i.e. if you were to enter 1 tonne, instead enter 1,000 KG

    Mass Limit configuation

    Mass Limit configuation

  3. Once you enter GML Mass Limit the Mass Scheme type drop-down menu will be available to select out of GML, CML, HML, Permit, QML 1, and QML 2.

    Additional Mass Limits

    Additional Mass Limits

  4. Once all Mass Limits are assigned, your verhicle should look similar to the below (assuming the only applicable Mass Limit is GML).

    GML assigned Mass Limit

    GML assigned Mass Limit

If you require any further assistance please contact Gearbox Support.